This training is an introduction to continuous modeling with FLAC2D and FLAC3D. At the end of the course, participants will master the graphical interface, documentation and the main modeling steps. Concepts are illustrated using a tunnel excavation example, from building the model geometry to results analysis. This introductory course provides the foundation for more advanced use of the software, which can be covered in more specific training modules.
This tutorial series shows you how to calculate the total and effective stresses and water flow in a homogeneous embankment dam. This FLAC 8.1 tutorial demonstrates how to conduct a steady-state seepage analysis to calculate the pore water pressures in the embankment due to the reservoir. This is part two of a three part tutorial series.
Download the project and grid files used in this tutorial:
Embankment Tutorial (2 of 3) (zip | 3 kb)
Tutorial - Part 1 | Tutorial - Part 2 | Tutorial - Part 3